 | Design Engineer (4507) |
| Roles and Responsibilities:
Supports 787-9 Team requires design optimization experience of lightweight aircraft structure considering cost, assembly, functionality, and performance. Must be team ori |
| Job Location: Chula Vista |
| Job Category: Engineering |
| Date Posted: 5/11/2012 4:28:56 PM |
 |
| Stress Engineer (4506) |
| Roles and Responsibilities:
Seeking a Stress Engineer to work in our 787-9 Team ideally experienced in traditional fundamentals and modern, computer-based analysis tools, with an eagerness to learn |
| Job Location: Chula Vista |
| Job Category: Engineering |
| Date Posted: 5/11/2012 3:13:07 PM |
|
| Quality Engineer (4500) |
| Roles and Responsibilities:
Execute the organizational Plan and lead the continuous improvement activities in targeted areas of the organization in support of Leadership. Provide quality assurance s |
| Job Location: Tullahoma |
| Job Category: Engineering |
| Date Posted: 5/10/2012 12:16:58 PM |
|
| Manufacturing Engineer (4496) |
| Roles and Responsibilities:
Reporting to the Supervisor, Technical Manager, as the Manufacturing Methods Engineering Specialist (M.E.), you will be responsible for providing component part manufactu |
| Job Location: Tullahoma |
| Job Category: Manufacturing |
| Date Posted: 5/9/2012 2:17:05 PM |
|
| General Multidiscipline Engineer 4 (9210) |
| Roles and Responsibilities:
Senior level Liaison Engineering position.
Disposition of non-conforming hardware of commercial aircraft structure encountered during manufacturing/assembly processes an |
| Job Location: Hawthorne |
| Job Category: Engineering |
| Date Posted: 5/9/2012 11:22:24 AM |
|
| Structural Design (LMAERO-1223) |
| Roles and Responsibilities:
Will design and release manufacturing quality CATIA data sets for detail parts and assemblies, prepare structural layouts, coordinate design of structure with interfacing |
| Job Location: Fort Worth |
| Job Category: Engineering |
| Date Posted: 5/8/2012 11:22:56 AM |
|
| Administrative (LMAERO-1277) |
| Roles and Responsibilities:
Supports Workforce Strategy and Planning in all matters related to the department. To include assisting with data retrieval, analysis and input to build short and long ra |
| Job Location: Fort Worth |
| Job Category: Administrative |
| Date Posted: 5/8/2012 11:06:27 AM |
|
| Metal Prep Operator (9208) |
| Roles and Responsibilities:
Will work on clip set-ups and will be assisting machine operators. May disburse and move raw material/skins using an overhead crane. May make required weight and vacuum a |
| Job Location: Dallas |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 2:02:25 PM |
|
| Mfg Support Team Member 4 (9154) |
| Roles and Responsibilities:
Supports production, business, and other processes in a team-based manufacturing environment. Performs activities in a variety of cross-functional areas including product |
| Job Location: Hawthorne |
| Job Category: Manufacturing |
| Date Posted: 5/7/2012 1:47:02 PM |
|
| Metrology Technician (MC-17) |
| Roles and Responsibilities:
This occupation requires the repair and calibration of electrical/electronic and physical measuring Test and Measuring Equipment (TME), using Standards traceable to NIST, |
| Job Location: Fort Worth area |
| Job Category: Technician |
| Date Posted: 5/7/2012 1:33:58 PM |
|
| Flight Inspector (MC-16) |
| Roles and Responsibilities:
This occupation requires the inspection and functional check of aircraft assemblies, subassemblies and installations during the various stages of aircraft manufacture; in |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 1:28:14 PM |
|
| Assembly Inspector (MC-15) |
| Roles and Responsibilities:
This occupation requires the inspection and functional check of aircraft assemblies, subassemblies and installations during the various stages of aircraft manufacture; in |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 1:21:17 PM |
|
| Inspector-Non-Destructive Testing (MC-14) |
| Roles and Responsibilities:
This occupation requires the inspection and/or determination of the structural integrity of various materials such as metals, weldments, forgings, castings, electrical or |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 1:12:15 PM |
|
| Inspector Fabrication & Tooling (MC-13) |
| Roles and Responsibilities:
This occupation requires the inspection of machined parts for proper material, quality, machining dimensions, and functional usability. This occupation requires the ins |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 1:06:09 PM |
|
| Inspector Material/Detail (MC-12) |
| Roles and Responsibilities:
This occupation requires the inspection of aerospace parts, assemblies, kits, spares, aerospace ground equipment, mobile training units, industrial equipment, subsystems, |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 1:01:08 PM |
|
| Bonding Equiptment Operator (MC-11) |
| Roles and Responsibilities:
This occupation requires the setup and operation of numerically or manually controlled composite manufacturing equipment (CME) and/or manual repair of composite parts and |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:53:09 PM |
|
| Painter (MC-10) |
| Involves the preparation and application of prime and finish coatings to aircraft parts and assemblies, aircraft in flight status and/or aircraft in delivery status.
Determines procedure and sequenc |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:48:18 PM |
|
| Tool Maker (MC-9) |
| Roles and Responsibilities:
This occupation requires the layout, planning the sequence of operations, fabrication, assembly or repair, and related manufacturing research/development of various types |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:42:26 PM |
|
| General Machinist (MC-8) |
| Roles and Responsibilities:
This occupation requires planning, lay out of work, input of data, setting up and operation of various types of lathes, grinding machines, multiple spindle boring machine |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:39:35 PM |
|
| Bonding & Composite Fabricator (MC-7) |
| Roles and Responsibilities:
This occupation requires the layup of complex contoured composite details including assembly, trimming, prefit, and fabrication of graphite, fiberglass, and plastic parts |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:37:24 PM |
|
| Aircraft Tubing Welder (MC-6) |
| Roles and Responsibilities:
This occupation requires a combination of electric TIG welding of various metals and alloys on aircraft parts assemblies, and other parts and assemblies, to support aircr |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:14:51 PM |
|
| Tube Bender (MC-5) |
| Roles and Responsibilities:
This occupation requires preparing, bending, forming and finishing of aircraft tubing, and assembling tubing detail parts. Sets up on various types of tube bending machin |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:10:27 PM |
|
| Avionics Tech/Installer (MC-4) |
| Roles and Responsibilities:
Is responsible for complete operational check-out of any electronic system prior to or after installation on the airplane. Diagnoses malfunctioning and performs rework, |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:08:02 PM |
|
| Electrical Assembler (MC-3) |
| Roles and Responsibilities:
Installs preassembled wiring harnesses in conformance with predetermined routing, fasten in place with clips, brackets and other holding devices.
Establishes the locat |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:05:38 PM |
|
| Flight Line Mechanic (MC-2) |
| Minimum Qualifications:
Must have a minimum of 4 years Flight Line experience in preflight, launch and recovery and postflight servicing of aircraft.
Must be able to perform preflight and postfli |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 12:01:28 PM |
|
| Structural Assembler (MC-1) |
| Minimum Qualifications:
Must have experience performing assembly and installation work of the nature described below. Well versed in use of blueprints and engineering drawings.
Interpret standar |
| Job Location: Fort Worth area |
| Job Category: Light Industrial |
| Date Posted: 5/7/2012 11:45:26 AM |
|
| CAD Designer/Checker (4341) |
| Roles and Responsibilities:
Responsible for the CAD support of design projects and execution of Engineering Design Changes. Support tasks includes generation of solid models and associated drawings. |
| Job Location: Troy |
| Job Category: Engineering |
| Date Posted: 5/4/2012 2:03:14 PM |
|
| Inspection Aircraft Assembly (9102) |
| Roles and Responsibilities:
Perform visual and physical inspections of aircraft assemblies to assure compliance to Engineering requirements. Take thickness measurements of composite assemblies as re |
| Job Location: Stuart |
| Job Category: Light Industrial |
| Date Posted: 5/4/2012 12:28:26 PM |
|
| Windows Server\VM Ware Admin (9117) |
| Roles and Responsibilities:
The Windows Server Administrator works as a member of the Server Support team to design, implement, monitor, and maintain production Windows systems and infrastructure. A |
| Job Location: Dallas |
| Job Category: I T |
| Date Posted: 5/4/2012 12:23:01 PM |
|
| Sr. Project Engineer (4464) |
| Roles and Responsibilities:
The Project Engineer will be responsible for coordinating technical and program activities, including the scheduling of necessary data and documentation that support manu |
| Job Location: Chula Vista |
| Job Category: Engineering |
| Date Posted: 5/4/2012 12:09:25 PM |
|
| Project Engineer (4458) |
| Roles and Responsibilities:
The Project Engineer will be responsible for coordinating technical activities, including the flow / scheduling of necessary technical data, design schedules, with operat |
| Job Location: Chula Vista |
| Job Category: Engineering |
| Date Posted: 5/4/2012 12:05:14 PM |
|
| Engineering Intern (4452) |
| Roles and Responsibilities:
To assist engineering with documentation, analysis, and other associated engineering tasks related to the development, testing, qualification, and certification of aircra |
| Job Location: Phoenix |
| Job Category: Engineering |
| Date Posted: 5/4/2012 11:42:33 AM |
|
| Manufacturing Engineer (4450) |
| Roles and Responsibilities:
Plan, coordinate, and execute all the Interior Ft. Worth (DFW) Manufacturing Engineer (ME) activities related to the transfer of identified final and sub assemblies from |
| Job Location: Fort Worth |
| Job Category: Manufacturing |
| Date Posted: 5/4/2012 11:26:20 AM |
|
| Quality Technician (4448) |
| Roles and Responsibilities:
Reporting to the Quality Assurance Manager. Incoming Inspection.
Ability to use inspection checklists to make pass/fail decisions and release final product.
Will also |
| Job Location: Princeton |
| Job Category: Technician |
| Date Posted: 5/4/2012 11:12:09 AM |
|
| Sr Technical Editor (LMSP-240) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Working with Proposal and Program Managers, the Editor is responsible for development and production of proposals in respon |
| Job Location: Denver |
| Job Category: Administrative |
| Date Posted: 5/1/2012 11:16:32 AM |
|
| Proposal Graphic Artist (LMSP-239) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Candidate is expected to create, design, lay out, and coordinate editorial illustrations and creative artwork for publicati |
| Job Location: Denver |
| Job Category: Administrative |
| Date Posted: 5/1/2012 10:57:58 AM |
|
| Administrative Support 1 (8856) |
| Roles and Responsibilities:
Performs a variety of routine administrative/clerical tasks in such functional areas as purchasing or for a specific project/business/technical unit.
Gathers, collects, |
| Job Location: Dallas |
| Job Category: Administrative |
| Date Posted: 5/1/2012 10:48:37 AM |
|
| Electronics Development Engineer (4363) |
| Roles and Responsibilities:
Electronics engineering department team member involved in the design and development of electronic engine controls targeted for Aerospace applications. Involvement in ev |
| Job Location: Hartford |
| Job Category: Engineering |
| Date Posted: 4/24/2012 5:25:17 PM |
|
| Electronics Project Lead (4358) |
| Roles and Responsibilities:
Maintain development program on schedule and within approved budget
Execute program in compliance with the internal product development process through tollgate system. |
| Job Location: Hartford |
| Job Category: Engineering |
| Date Posted: 4/24/2012 5:19:23 PM |
|
| Electronics Project Lead (4357) |
| Roles and Responsibilities:
Maintain development program on schedule and within approved budget
Execute program in compliance with the internal product development process through tollgate system. |
| Job Location: Hartford |
| Job Category: Engineering |
| Date Posted: 4/24/2012 4:58:41 PM |
|
| Cisco Network Administrator (9160) |
| Roles and Responsibilities:
Seeking a CCNA level network professional with experience as a Tier-2 Network Engineer. Experienced with Enterprise network design, implementation and optimization.
Expe |
| Job Location: Dallas |
| Job Category: I T |
| Date Posted: 4/24/2012 3:13:46 PM |
|
| Metl Bndr & Asmbl Sr (9158) |
| Roles and Responsibilities:
Associated Duties and Responsibilities: Improvises simple shop aids to facilitate bonding and assembly operations. Fabricates detail such as clips, angles, brackets and s |
| Job Location: Hawthorne |
| Job Category: Light Industrial |
| Date Posted: 4/24/2012 3:06:19 PM |
|
| Jr Server Administrator \ TSM Administrator (9136) |
| Roles and Responsibilities:
Tivoli Storage Manager (TSM) Administration including configuring and administering our TSM environment. Will also provide Jr. Server Administrator duties on UNIX and Win |
| Job Location: Dallas |
| Job Category: I T |
| Date Posted: 4/24/2012 2:36:40 PM |
|
| Network\Security Admin (9135) |
| Roles and Responsibilities:
Network and Security Administrator to oversee network and security architecture and operations of Enterprise Infrastructure. Responsible for the research, deployment, and |
| Job Location: Dallas |
| Job Category: I T |
| Date Posted: 4/24/2012 12:48:08 PM |
|
| UNIX\Linux\Windows Server Admin (9118) |
| Roles and Responsibilities:
The Server Administrator works as a member of the Server Support team to design, implement, monitor, and maintain production Server systems and infrastructure. Activities |
| Job Location: Dallas |
| Job Category: I T |
| Date Posted: 4/24/2012 12:41:13 PM |
|
| Materials Support Team Member 2 (8768) |
| Roles and Responsibilities:
Supports a team-based material organization. Performs activities in a variety of cross-functional areas including materials planning, total quality management, procuremen |
| Job Location: Grand Prairie |
| Job Category: Administrative |
| Date Posted: 4/24/2012 12:34:09 PM |
|
| Procurement, Planning and Ctl 3 (8721) |
| Roles and Responsibilities:
Buyer position. Sources, purchases, plans, and schedules the movement of raw materials, packaging materials, parts, components, services, supplies, finished goods and rel |
| Job Location: Stuart |
| Job Category: Manufacturing |
| Date Posted: 4/24/2012 11:43:57 AM |
|
| Subsystems Engineer (LMAERO-1237) |
| Roles and Responsibilities:
Candidate will be responsible for Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and |
| Job Location: Fort Worth |
| Job Category: Engineering |
| Date Posted: 4/19/2012 6:25:50 PM |
|
| Training Coordinator (LMAERO-1217) |
| Roles and Responsibilities:
Deliver aircraft manufacturing structure related courses to include complex structures to instruct in blueprint reading, structures assembly in modification changes worki |
| Job Location: Palmdale |
| Job Category: Engineering |
| Date Posted: 4/19/2012 6:15:09 PM |
|
| Mechanical Design Engineer (LMSP-238) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Support THAAD ILS as Design Sr Spec supporting Battery Procurement PSE Hardware including Battery Support Center system and |
| Job Location: Huntsville |
| Job Category: Engineering |
| Date Posted: 4/19/2012 6:00:17 PM |
|
| Paint Processor Sr (9152) |
| Roles and Responsibilities:
Perform all types of production painting, including painting requiring the application of special techniques and finishes. Locate and apply insignia and decoration markin |
| Job Location: Milledgeville |
| Job Category: Light Industrial |
| Date Posted: 4/16/2012 11:47:15 AM |
|
| Manufacturing Engineer (4350) |
| Roles and Responsibilities:
Interprets engineering drawings and determines best assembly practices, writes routing in accordance to MRB disposition gives technical guidance to team leader and hourly |
| Job Location: Chula Vista |
| Job Category: Manufacturing |
| Date Posted: 4/12/2012 12:32:50 PM |
|
| SAP Testing Coordinator (4235) |
| THIS POSITION REQUIRES A FACE TO FACE INTERVIEW AT CANDIDATE'S OWN EXPENSE
Roles and Responsibilities:
The SAP Testing Coordinator will own the ISR SAP Integrated Test Cycle (ITC) process and |
| Job Location: Danbury |
| Job Category: Administrative |
| Date Posted: 4/9/2012 11:16:42 AM |
|
| Drivematic Operator Sr Spec (9119) |
| Roles and Responsibilities:
Perform complex setups, adjust and operate any N/C automatic riveting machine to fasten any part and/or assemblies that are within the capacity of the machine.
Perform |
| Job Location: Hawthorne |
| Job Category: Light Industrial |
| Date Posted: 4/4/2012 4:58:45 PM |
|
| Industrial Engineer 3 (9108) |
| Roles and Responsibilities:
Plans facility & equipment layouts; Determines the most efficient sequence of operations and work flow; and establishes methods for maximum utilization of production faci |
| Job Location: Stuart |
| Job Category: Manufacturing |
| Date Posted: 4/4/2012 1:26:46 PM |
|
| Test Engineer 3 (9592) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effecti |
| Job Location: San Diego |
| Job Category: Engineering |
| Date Posted: 4/3/2012 12:42:09 PM |
|
| Test Engineer 2 (9591) |
| Roles and Responsibilities:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are |
| Job Location: San Diego |
| Job Category: Engineering |
| Date Posted: 4/3/2012 12:38:23 PM |
|
| General Multidiscipline Engineer 3 (7984) |
| Roles and Responsibilities:
Aircraft Structural Liaison Engineer – Reviews and provides disposition to non-conforming composite and metallic detail part and assembly withholding tags. “Requirements |
| Job Location: Grand Prairie |
| Job Category: Engineering |
| Date Posted: 3/29/2012 12:45:04 PM |
|
| Tool Engineer 4 (9082) |
| Roles and Responsibilities:
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such fac |
| Job Location: Nashville |
| Job Category: Engineering |
| Date Posted: 3/27/2012 2:00:10 PM |
|
| Material Planning & Control 2 (9104) |
| Roles and Responsibilities:
Position involves coordinating all supply chain activities to support manufacturing with all material needed to perform planned operations to on schedule.
Must be capabl |
| Job Location: Grand Prairie |
| Job Category: Manufacturing |
| Date Posted: 3/27/2012 11:52:10 AM |
|
| Aircraft Structures Mechanic (8896) |
| Roles and Responsibilities:
Perform structural assembly and fastener installation of components and assemblies. Assure quality conformance to company/customer requirements and specifications. Respon |
| Job Location: Hawthorne |
| Job Category: Light Industrial |
| Date Posted: 3/26/2012 1:35:45 PM |
|
| Sr. AC Mechanic Sp (9034) |
| Roles and Responsibilities:
Function: Perform structural assembly and fastnener installation operations of major/complex components and assemblies. Assure quality conformance to company/customer req |
| Job Location: Hawthorne |
| Job Category: Light Industrial |
| Date Posted: 3/26/2012 1:34:41 PM |
|
| Software Engineer (4261) |
| Please Note: ALL WESTFORD POSITIONS REQUIRE FACE TO FACE INTERVIEWS AT CANDIDATE'S OWN EXPENSE AND ALL OT IS PAID AS ST
Roles and Responsibilities:
These positions will support the DB-110 se |
| Job Location: Westford |
| Job Category: Engineering |
| Date Posted: 3/22/2012 2:37:34 PM |
|
| Project Electrical Engineer (4256) |
| Roles and Responsibilities:
The ability to analyze existing legacy parts and troubleshoot failures to a component level a must. A working understanding of military, aircraft and industry design stan |
| Job Location: Eagan |
| Job Category: Engineering |
| Date Posted: 3/22/2012 2:26:02 PM |
|
| Engineering Analyst 2 (4238) |
| Roles and Responsibilities:
Will provide Weekly Project Status updates including engineering release, tooling design, tooling procurement, tooling manufacturing, procurement (Part Shortages/Availabi |
| Job Location: Riverside |
| Job Category: Administrative |
| Date Posted: 3/22/2012 2:04:54 PM |
|
| Material Planning & Control 2 (8899) |
| Roles and Responsibilities:
This position requires detail follow up with Buy 2 Buy Suppliers. Will lead weekly meetings with new suppliers, assist in resolving constraints and providing status to Su |
| Job Location: Hawthorne |
| Job Category: Administrative |
| Date Posted: 3/21/2012 3:56:28 PM |
|
| Purchasing 2 (8503) |
| Roles and Responsibilities:
Purchases machinery, equipment, tools, raw material, packaging materials, parts, services, and supplies necessary for operation of an organization. Compiles and analyzes |
| Job Location: Grand Prairie |
| Job Category: Administrative |
| Date Posted: 3/21/2012 3:54:58 PM |
|
| Metal Prep Operator (9095) |
| Roles and Responsibilities:
Will work on clip set-ups and will be assisting machine operators. May disburses and move raw material/skins using an overhead crane. May make required weight and vacuum |
| Job Location: Hawthorne |
| Job Category: Light Industrial |
| Date Posted: 3/20/2012 6:06:24 PM |
|
| Insp Tooling Int (8988) |
| Roles and Responsibilities:
Operate Coordinate Measuring Machine to run inspection measurement programs on composite or metal details. Evaluate measurement data and use best fit practices to assure |
| Job Location: Milledgeville |
| Job Category: Engineering |
| Date Posted: 3/20/2012 5:55:09 PM |
|
| Prod Planning/Schedg/Mtl Ctl 1 (8754) |
| Roles and Responsibilities:
Plans, prepares, issues, and controls production schedules and material requirements to ensure a controlled flow of approved materials timed to meet production requiremen |
| Job Location: Milledgeville |
| Job Category: Administrative |
| Date Posted: 3/20/2012 5:35:15 PM |
|
| Publisher (LMSP-231) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Develop New Business and Program Proposals
Minimum Qualifications:
9+ years experience required
Candidate must ha |
| Job Location: Sunnyvale |
| Job Category: Administrative |
| Date Posted: 3/20/2012 4:48:38 PM |
|
| Technical Trainer (LMAERO-1249) |
| Roles and Responsibilities:
The successful candidate must possess comprehensive knowledge of aircraft finish systems, particularly related to military fighter aircraft. Critical skills for this posi |
| Job Location: Fort Worth |
| Job Category: Administrative |
| Date Posted: 3/20/2012 4:35:49 PM |
|
| Software Engineer (LMAERO-1247) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Applicant will be the navigation system lead and subject matter expert on the program. The applicant will be responsible fo |
| Job Location: Palmdale |
| Job Category: Engineering |
| Date Posted: 3/20/2012 4:24:10 PM |
|
| Sr. Toolmaker (9088) |
| Roles and Responsibilities:
To plan, develop, layout, fabricate, construct and repair a variety of complicated and complex tooling as required to support all facets of aircraft manufacturing.
Such |
| Job Location: Stuart |
| Job Category: Manufacturing |
| Date Posted: 3/14/2012 5:14:37 PM |
|
| SAP Interface Programmer/Analyst (4171) |
| THIS IS A DIRECT POSITION, NOT CONTRACT!!
Roles and Responsibilities:
This position will be responsible for designing and developing solutions for a wide range of complex SAP integration assig |
| Job Location: Charlotte |
| Job Category: Administrative |
| Date Posted: 3/9/2012 5:27:15 PM |
|
| Quality Engineer 2 (4162) |
| Roles and Responsibilities:
Execute the organizational Plan and lead the quality improvement activities in targeted areas of the organization in support of Leadership. Provide quality assurance supp |
| Job Location: Cleveland |
| Job Category: Engineering |
| Date Posted: 3/9/2012 5:18:57 PM |
|
| Project Engineer (4155) |
| Roles and Responsibilities:
The Project Engineer will be supporting program Certification activities within the Product and Process Definition organization. Responsibilities will include development |
| Job Location: Chula Vista |
| Job Category: Engineering |
| Date Posted: 3/9/2012 4:59:47 PM |
|
| Engineer Systems 4- SAP/FI/CO (9585) |
| Roles and Responsibilities:
The IT Systems Engineer is responsible for the analysis, design and support of solutions within SAP that meet the business needs of the customer. The individual will foll |
| Job Location: Newport News |
| Job Category: I T |
| Date Posted: 3/7/2012 5:13:01 PM |
|
| Journeyman System Engineer (9584) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effecti |
| Job Location: Aberdeen |
| Job Category: I T |
| Date Posted: 3/7/2012 5:06:33 PM |
|
| IT Security Analyst (Comp Sec Tech NG Intrnl Sys 5) (9583) |
| Roles and Responsibilities:
The candidate must be able to obtain a USPS Sensitive clearance and must be able to pass a pre-screen prior to interview.
The IT Security Office is responsible for OIG |
| Job Location: Washington |
| Job Category: I T |
| Date Posted: 3/7/2012 4:59:34 PM |
|
| Import Export Administrator - 2 (9579) |
| Roles and Responsibilities:
Provide classification according to the HTSUSA. Processes and submits Customs Rulings; perform other duties as required. Well organized and attention to detail. |
| Job Location: El Segundo |
| Job Category: Administrative |
| Date Posted: 3/7/2012 4:31:22 PM |
|
| Operations Lead (9577) |
| Roles and Responsibilities:
We are looking for a Programmer Analyst to help design and implement technical problem resolution processes for our contract and assist with the resolution of daily file |
| Job Location: Baltimore |
| Job Category: I T |
| Date Posted: 3/7/2012 4:26:31 PM |
|
| Junior System Engineer (9574) |
| Roles and Responsibilities:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems
Performs fu |
| Job Location: Aberdeen |
| Job Category: I T |
| Date Posted: 3/7/2012 4:16:22 PM |
|
| Java Developer (9573) |
| Roles and Responsibilities:
Candidates must excel in application architecture and design, problem solving skills, strategic thinking, and working in a team oriented environment.
Possess strong ana |
| Job Location: Baltimore |
| Job Category: I T |
| Date Posted: 3/7/2012 4:07:41 PM |
|
| Quality Engineer 2 (9572) |
| Roles and Responsibilities:
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials prod |
| Job Location: San Diego |
| Job Category: I T |
| Date Posted: 3/7/2012 4:03:18 PM |
|
| Project Coordinator (9550) |
| Roles and Responsibilities:
Leads and directs one or more project teams engaged in the design, implementation and modification of IT projects that span across functional organizations. Prepares proj |
| Job Location: Manhattan |
| Job Category: I T |
| Date Posted: 3/7/2012 3:31:53 PM |
|
| Information Systems Project Manager 4- IT (9534) |
| Roles and Responsibilities:
Leads and directs one or more project teams engaged in the design, implementation and modification of IT projects that span across functional organizations. Prepares proj |
| Job Location: Newport News |
| Job Category: I T |
| Date Posted: 3/6/2012 5:51:40 PM |
|
| Information Systems Project Manager 4- IT (9533) |
| Roles and Responsibilities:
Leads and directs one or more project teams engaged in the design, implementation and modification of IT projects that span across functional organizations. Prepares proj |
| Job Location: Newport News |
| Job Category: I T |
| Date Posted: 3/6/2012 5:49:37 PM |
|
| Software Engineer 1 (9528) |
| Roles and Responsibilities:
Seeking an entry level contractor to join our team of qualified, diverse individuals. This position will be located in San Diego and Palmdale, CA. Designing and developin |
| Job Location: San Diego |
| Job Category: I T |
| Date Posted: 3/6/2012 5:47:09 PM |
|
| On-call Publications Analyst - 2 (9525) |
| Roles and Responsibilities:
Publications analyst responsible for organizing production projects from planning phase to final printing in fast-paced environment with tight deadlines. Candidate must f |
| Job Location: Redondo Beach |
| Job Category: Administrative |
| Date Posted: 3/6/2012 5:42:29 PM |
|
| Computer Programmer 2 (9518) |
| Roles and Responsibilities:
Lead and coordinate resources to deliver quality products efficiently and on time
Estimate resources and time required to complete a project
Provide expertise in deve |
| Job Location: Atlanta |
| Job Category: I T |
| Date Posted: 3/6/2012 5:17:33 PM |
|
| Software Engineer Internal 4 (9517) |
| Minimum Qualifications:
Must be an expert in Java and/or C/C++, software architecture and system engineering design process with a background in all phases of the software development life cycle, in |
| Job Location: San Diego |
| Job Category: I T |
| Date Posted: 3/6/2012 5:10:51 PM |
|
| Computer Programmer 3 (9497) |
| Roles and Responsibilities:
The individual will provide technology experience in the area of Java and JEE development and will focus on delivering high quality enterprise applications as part of a d |
| Job Location: Atlanta |
| Job Category: I T |
| Date Posted: 3/6/2012 3:31:52 PM |
|
| Product Trainer 3 (9482) |
| Roles and Responsibilities:
Responsible for review of F-35 training material against processes and procedures outlined in style guides and strategy documents. Interface and collaboration with course |
| Job Location: El Segundo |
| Job Category: I T |
| Date Posted: 3/6/2012 1:50:54 PM |
|
| Administration Generalist - 3 (9474) |
| Roles and Responsibilities:
Perform Data Management (DM) on a state-of-the art unmanned aircraft.
This position will be responsible for implementing and maintaining a Data Management processes, wh |
| Job Location: San Diego |
| Job Category: Administrative |
| Date Posted: 3/6/2012 1:46:45 PM |
|
| Field Engineer 2 (9463) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Individual will support the NG Operations Support Center (OSC) providing a single point of contact for rapid response techn |
| Job Location: San Diego |
| Job Category: Engineering |
| Date Posted: 3/6/2012 12:29:29 PM |
|
| Systems Engineer (LMAERO-1200) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
This engineer will be responsible for designing systems data networks. The applicant will be the prime technical contact fo |
| Job Location: Palmdale |
| Job Category: Engineering |
| Date Posted: 2/27/2012 1:09:13 PM |
|
| Manufacturing Expediter 2 (8662) |
| Roles and Responsibilities:
Part Time --- Contract Position - 20 hours a week.
General - performs a variety of routine/clerical tasks for manufacturing.
Gathers, collects, records, tracks and ver |
| Job Location: Hawthorne |
| Job Category: Clerical |
| Date Posted: 2/27/2012 12:31:32 PM |
|
| Embedded Software Engineer (4078) |
| Please Note: ALL WESTFORD POSITIONS REQUIRE FACE TO FACE INTERVIEWS AT CANDIDATE'S OWN EXPENSE AND ALL OT IS PAID AS ST
Roles and Responsibilities:
The DB-110 team needs an embedded software |
| Job Location: Westford |
| Job Category: Engineering |
| Date Posted: 2/13/2012 1:01:34 PM |
|
| Senior Mechanical Engineer (4062) |
| Please Note: ALL WESTFORD POSITIONS REQUIRE FACE TO FACE INTERVIEWS AT CANDIDATE'S OWN EXPENSE AND ALL OT IS PAID AS ST
Roles and Responsibilities:
Position will provide Senior level Mechanic |
| Job Location: Westford |
| Job Category: Engineering |
| Date Posted: 2/1/2012 5:58:07 PM |
|
| Senior Components Engineer (3824) |
| Please Note: ALL WESTFORD POSITIONS REQUIRE FACE TO FACE INTERVIEWS AT CANDIDATE'S OWN EXPENSE AND ALL OT IS PAID AS ST
Roles and Responsibilities:
Goodrich ISR Systems is seeking a Senior C |
| Job Location: Danbury |
| Job Category: Engineering |
| Date Posted: 12/15/2011 11:57:24 AM |
|
| Facilities Engineer 3 (9403) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
OVERSEES THE DESIGN, RECONFIGURATION, AND ALTERATION OF EQUIPMENT, MACHINERY, BUILDINGS, STRUCTURES, AND OTHER FACILITIES; |
| Job Location: Palmdale |
| Job Category: Engineering |
| Date Posted: 12/5/2011 5:01:58 PM |
|
| Computer Programmer 3 (9399) |
| Roles and Responsibilities:
Provide expertise in developing Java, JavaScript, STRUTS applications(s) using the SQL Server DBMS. No Team-lead or Expert level experience is necessary.
These activit |
| Job Location: Atlanta |
| Job Category: I T |
| Date Posted: 12/5/2011 4:32:17 PM |
|
| Engineer 4 (9398) |
| REQUIRES AN ACTIVE SECRET CLEARANCE!!
Roles and Responsibilities:
Instrumentation and Data Systems engineer responsible for the development and maintenance of complex instrumentation and da |
| Job Location: Patuxent River |
| Job Category: Engineering |
| Date Posted: 12/5/2011 4:24:25 PM |
|
| Senior Materials Engineer (3775) |
| Roles and Responsibilities:
Support Existing and Developing Designs, Research and Develop materials purchase documentation and related fabrication processes. Optimize Materials and Processes for use |
| Job Location: Danbury |
| Job Category: Engineering |
| Date Posted: 11/30/2011 1:14:17 PM |
|
